S&S Cycle 33-5062 450S Camshaft

S&S cams are tested on the dyno, street and racetrack before being offered to the public. With hundreds of test hours on them you know that you are getting the best cam S&S can produce. For lower compression motors up to 88in. with compression up to 8.5:1. Good low and mid-range torque. Recommend hydraulic lifters. Intake Opening (degrees): 18. Intake Closing (degrees): 38. Exhaust Opening (degrees): 40. Exhaust Closing (degrees): 18. Intake Duration (degrees): 236. Exhaust Duration (degrees): 238. Intake Lift (in): .475. Exhaust Lift (in): .475 S&S cams are tested on the dyno, street and racetrack before being offered to the public. With hundreds of test hours on them you know that you are getting the best cam S&S can produce. For lower compression motors up to 88in. with compression up to 8.5:1. Good low and mid-range torque. Recommend hydraulic lifters. Intake Opening (degrees): 18. Intake Closing (degrees): 38. Exhaust Opening (degrees): 40. Exhaust Closing (degrees): 18. Intake Duration (degrees): 236. Exhaust Duration (degrees): 238. Intake Lift (in): .475. Exhaust Lift (in): .475 Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.