Andrews 216350 50H Chain Drive Camshafts

Splined chain drive camshafts. Kits include: cams, 1 roller bearing and 1 ball bearing (bearings only included in 1999-2006 models). Designed for use with stock Harley-Davidson hydraulic lifters. Can be installed on both carbureted and fuel injected models. Designed for 95in. + motors with 9.25:1 to 9.50:1 compression ratio and stock heads. For lighter bikes. Cams work best at higher rpm of 2500-6000. Can be used with stock valve springs and tappets. NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance Splined chain drive camshafts. Kits include: cams, 1 roller bearing and 1 ball bearing (bearings only included in 1999-2006 models). Designed for use with stock Harley-Davidson hydraulic lifters. Can be installed on both carbureted and fuel injected models. Designed for 95in. + motors with 9.25:1 to 9.50:1 compression ratio and stock heads. For lighter bikes. Cams work best at higher rpm of 2500-6000. Can be used with stock valve springs and tappets. NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance Intake Opening (degrees): 20. Intake Closing (degrees): 48. Exhaust Opening (degrees): 54. Exhaust Closing (degrees): 18. Intake Duration (degrees): 248. Exhaust Duration (degrees): 252. Intake Lift (in): .510. Exhaust Lift (in): .510.